Work orders

Yacht work orders that show what's left.

From a five-minute crew task to a haul-out project, every job gets the right amount of structure, stays linked to the problem that caused it, and isn't closed until someone verifies it.

Harbor Guardian · Work orders
Close seacock and drain strainer
Marine Diesel Co.
Done
Replace lid O-ring
Marine Diesel Co.
Done
Inspect impeller, replace if worn
Due Friday.
In progress
Run engine, check for leaks
Add a photo when complete.
Pending
01 Work management

Three sizes of work.

Tasks

Quick jobs for crew, with an assignee and a due date or due engine hours.

Work orders

A defined job, often for a vendor, broken into tasks.

Projects

Refits and haul-outs, grouping work orders under a budget and dates.

02 Work orders

Every job moves through clear steps.

Harbor Guardian records when each step happened, so nobody has to ask whether the raw water pump was actually serviced or just discussed.

  1. 01

    Reported

    The need shows up: a finding, a service coming due, or a vendor's estimate.

  2. 02

    Scheduled

    A vendor or crew member and a date are set.

  3. 03

    In progress

    Tasks are ticked off as the job moves.

  4. 04

    Completed

    The work is done and logged to the component.

  5. 05

    Verified

    Someone checks it and closes it with proof.

A marine technician services a raw water pump in a yacht engine room
Linked to everything

The vendor, the component, the finding, the invoice.

Each work order links to the vendor doing it, the component it's on, the finding that caused it, the estimate or invoice behind it and the project it belongs to. Finished work goes into the component's service log.

03 Projects

Budget and actual, side by side.

Group related work orders into a project with a budget, actual cost and dates. The project shows every work order in it and what's still open, so a haul-out doesn't turn into a list held together by texts.

Haul-out · Bottom and running gear
Budget $38,000 · actual $31,450.
Shaft and cutless bearing
Seaside Boatyard.
Through-hull inspection
Seaside Boatyard.
Zincs and anodes
Crew.
A Harbor Guardian project for a winter engine service, with its budget, spend and work orders
Questions

Work orders, answered.

Q What's the difference between a task, a work order and a project?

A task is one thing someone can tick off, like cleaning a strainer. A work order is a defined job, often for a vendor, with its own tasks, cost and stages. A project groups related work orders, such as a haul-out or a refit, with a budget and dates.

Q What are the stages of a yacht work order?

Reported, scheduled, in progress, completed and verified. In Harbor Guardian, completion isn't the last step: the work order stays open until someone has checked the result and marked it verified.

Q Can I track work order costs against a budget?

Yes. Each work order records its cost, and a project adds up the costs of its work orders as spent against the project's budget, so you can see what's left before the next invoice arrives.

Q Can work orders be assigned to vendors?

Yes. Each work order names the vendor doing the job and the person responsible for it, and links to the finding that caused it and the document behind it, such as the estimate or invoice.

See it on your boat

Walk through Harbor Guardian with us.

Book a demo and we'll show you the whole loop on a real yacht: an inspection, the findings it raised, and the work that closed them out. Bring your questions about your own boat or the fleet you manage.